Novatel Software Version 4.45 OM-20000026 Rev 1 MKTA/B Time of Mark Input

D Logs summary
MiLLennium Command Descriptions Manual 155
MKTA/B Time of Mark Input
This log contains the time of the detected Mark Input pulse leading edge as detected at the Mark Input I/O port.
The resolution of this measurement is 49ns. Refer to the GPSCard Installation and Operating Manual Appendix
for the Mark Input pulse specifications.
MKTA
Structure:
Example:
$MKTA,653,338214.773382376,0.000504070,0.000000013,-8.000000000,0 *05[CR][LF]
MKTB
Format: Message ID = 04 Message byte count = 52
$MKTA week seconds offset offset std
utc offset cm status *xx [CR][LF]
Field # Field type Data Description Example
1$MKTA Log header $MKTA
2week GPS week number 653
3seconds Seconds into the week as measured from the receiver clock, coincident with the
time of electrical closure on the Mark Input port. 338214.773382376
4offset Receiver clock offset, in seconds. A positive offset implies that the receiver clock
is ahead of GPS Time. To derive GPS time, use the following formula:
GPS time = receiver time - (offset)
0.000504070
5offset std Standard deviation of receiver clock offset, in seconds 0.000000013
6utc offset This field represents the offset of GPS time from UTC time, computed using
almanac parameters. To reconstruct UTC time, algebraically subtract this
correction from field 3 above (GPS seconds).
UTC time = GPS time - (utc offset)
-8.000000000
7cm status Receiver Clock Model Status where 0 is valid and values from -20 to -1 imply that
the model is in the process of stabilization 0
8*xx Checksum *05
9[CR][LF] Sentence terminator [CR][LF]
Field # Data Bytes Format Units Offset
1Sync 3 char 0
(header) Checksum 1 char 3
Message ID 4 integer 4
Message byte count 4 integer 8
2Week number 4 integer weeks 12
3Seconds of week 8 double seconds 16
4Clock offset 8 double seconds 24
5StdDev clock offset 8 double seconds 32
6UTC offset 8 double seconds 40
7Clock model status 4 integer 48