Novatel Software Version 4.45 OM-20000026 Rev 1 TM1A/B Time of 1PPS

D Logs summary
MiLLennium Command Descriptions Manual 201
TM1A/B Time of 1PPS
This log provides the time of the GPSCard 1PPS, normally high, active low pulse (1 millisecond), where fallin g
edge is reference, in GPS week number and seconds into the week. It also includes the receiver clock offset, the
standard deviation of the receiver clock offset and clock model status. This log will output at a maximum rate of
1 Hz.
TM1A
Structure:
Example:
$TM1A,794,414634.999999966,-0.000000078,0.000000021,-9.999999998,0*57[CR][LF]
TM1B
Format: Message ID = 03 Message byte count = 52
$TM1A week seconds offset offset std
utc offset cm status *xx [CR][LF]
Field # Field type Data Description Example
1$TM1A Log header $TM1A
2week GPS week number 794
3seconds GPS seconds into the week at the epoch coincident with the 1PPS
output strobe (receiver time) 414634.99999996 6
4offset Receiver clock offset, in seconds. A positive offset implies that the
receiver clock is ahead of GPS Time. To derive GPS time, use the
following formula:
GPS time = receiver time - (offset)
-0.000000078
5offset std Standard deviation of receiver clock offset, in seconds 0.000000021
6utc offset This field represents the offset of GPS time from UTC time, computed
using almanac parameters. To reconstruct UTC time, algebraically
subtract this correction from field 3 above (GPS seconds).
UTC time = GPS time + (utc offset)
-9.999999998
7cm status Receiver Clock Model Status where 0 is valid and values from -20 to -1
imply that the model is in the process of stabilization 0
8*xx Checksum *57
9[CR][LF] Sentence terminator [CR][LF]
Field # Data Bytes Format Units Offset
1 Sync 3 char 0
(header) Checksum 1 char 3
Message ID 4 integer 4
Message byte count 4 integer 8
2Week number 4 integer weeks 12
3Seconds of week 8 double seconds 16
4Clock offset 8 double seconds 24
5Stddev clock offset 8 double seconds 32
6UTC offset 8 double seconds 40
7Clock model status 4 integer 48