NuTone VSUC4SK installation instructions Using #8 Machine Screws and Threaded Mounting Shafts

•Position the round plastic spacer at each mounting hole location. To help hold the spacers in-place, position the small diameter end of the spacer towards the TV/Monitor case. Lift and hold the TV/Monitor in position. Select a 7/8", 1 1/4", or 1 1/2" mounting screw (supplied) based on your particular installation and insert the first mounting screw into one of the mounting holes in the TV/Monitor, and tighten.

• Insert the remaining 3 mounting screws (supplied) and tighten.

•Complete all the connections on the back of the TV/Monitor, if they were not made before attaching the TV/Monitor to the cabinet.

Using #8 Machine Screws and Threaded Mounting Shafts

• From underneath the cabinet, position the mounting hole template and mark the mounting hole locations.

•From underneath the cabinet, drill a 3/16" hole at each of the marked mounting hole locations (do not drill complete thru into the inside of the cabinet).

•Measure the distance between the frame of the cabinet and the bottom of the cabinet. Combine the supplied 1/4", 1/2" and 3/4" round plastic spacers so they will fill the space between the bottom of the cabinet and the frame of the cabinet.

•Depending on the depth of the cabinet, decide if you need to make all the connections to the back of the TV/Monitor before fastening the TV/Monitor to the bottom of the cabinet.

16