Graphics Blaster RIVA TNT2 Value Installation Guide 7
5. In the Install From Disk dialog box, type D:\WINDOWS (where D: represents your
CD-ROM drive) and click the OK button.
6. If prompted to select drivers, click the Graphics Blaster RIVA TNT2 Value drivers.
The drivers are copied to your system.
7. When prompted to restart your system, click the Ye s button.
8. After the system has restarted, proceed to install the applications. Click Start -> Run.
9. In the Run dialog box, type D:\WINDOWS\SETUP and click the OK butto n.
10.Follow the instructions on the screen to complete the setup.
If you do not install all the applications now, you can install them later.
To install in Windows 95 (OSR version 2.0 and later)1. Switch on your system.
Windows 95 automatically detects the graphics card.
A New Hardware Found message box appears, informing you that a display adapter has
been detected.
2. When a dialog box similar to Figure 6
appears, click the Next button.
3. Click the Other Locations button when it
appears in the Update Device Driver
Wizard dialog box.
4. Insert the Graphics Blaster RIVA TNT2
Value CD into your CD-ROM drive.
5. In the Select Other Location dialog box,
type D:\WINDOWS (where D: represents
your CD-ROM drive) and click the OK
button.
6. In the Update Device Driver Wizard
dialog box, click the Finish button.
7. In the Insert Disk message box, click the OK but ton.
Figure 6: The Update Device Driver Wizard dialog box.
GB_M64.fm Page 7 Monday, May 31, 1999 10:42 AM