3-2-2. RS-232C Interface Cable

(1) Make sure the printer is turn off.

CAUTION

Before connecting/disconnecting the interface cable, make sure that power to the printer and all the devices connected to the printer is turned off. Also make sure the power cable plug is disconnected from the AC outlet.

(2)Connect the interface cable to the connector on the rear panel of the printer.

(3)Tighten the connector screws.

RS-232C interface cable

3-2-3. USB Interface Cable

Affix the ferrite core onto the USB cable as shown in the illustration below and make sure to pass the cable through the cable support as shown in the illustra- tion.

4 cm (maximum)

– –