Oki 407II 11-1.Parallel Interface Model

11-1. Parallel Interface Model

ON			ON
OFF			OFF
No. 1 2 3 4 5 6 7 8 9 10			No. 1 2 3 4
		DIP-SW 1		DIP-SW 2
			DIP-SW 1
	Switch 1-1				Command emulation
		ON			Star Mode
		OFF			ESC/POS Mode

The factory settings of DIP switch are all on.

The functions of switches 1-2 through 1-10 will change according to the command emulation that has been set using switch 1-1.

(1) Star mode

Switch	Function	ON	OFF
1-1	Command emulation	Always ON
1-2	Should not be changed (Should be set to on)
1-3	Should not be changed (Should be set to on)
1-4	Sensor adjustment	Invalid	Valid
1-5	Pin #31 (INIT) reset signal	Valid	Invalid
1-6	Handshaking conditions	Offline or receive	Receive buffer full
	(conditions for BUSY)	buffer full
1-7	Automatic status back function	Invalid	Valid
1-8	Should not be changed (Should be set to on)
1-9	Low-power consumption mode	Invalid	Valid
1-10	Should not be changed (Should be set to on)

(2) ESC/POS mode

Switch	Function	ON	OFF
1-1	Command emulation	Always OFF
1-2	Graphic adjustment	203 DPI	180 DPI
1-3	Should not be changed (Should be set to on)
1-4	Sensor adjustment	Invalid	Valid
1-5	Pin #31 (INIT) reset signal	Valid	Invalid
1-6	Handshaking conditions	Offline or receive	Receive buffer full
	(conditions for BUSY)	buffer full
1-7	Automatic status back function	Invalid	Valid
1-8	Should not be changed (Should be set to on)
1-9	Low-power consumption mode	Invalid	Valid
1-10	Should not be changed (Should be set to on)

– 41 –