(4)Attach the holding plate to the printer.Then tighten the two screws that were supplied to secure it in place.
(5)Positiontheprinteroverthescrews,etc.,onthewall and then slide it downward to set it in place.
CAUTION
The weight of the printer, including a roll of paper with the largest diameter, is approximately 2.4 kg. The screws installed in the wall must have both a shear and tensile strength capable of withstanding a load of 12 kgf (118 N) or more.
(6)Push the cover open lever, and open the printer cover.
(7)Insert the paper roll as shown.
– 18 –