Note:

• This product contains a built-in wireless device and can only be used in the following countries.

USA, UK, France, Ireland, Belgium, Germany, Austria, Switzerland, Italy, Denmark, Norway, Sweden, Portugal, Spain, Estonia, Finland, Greece, Luxemburg, Netherlands, Canada, Slovakia, Slovenia, Czech, Hungary, Poland, Latvia, and Lithuania.

• This product contains Transmitter Module which conforms to the R&TTE Directive.

• This product contains Transmitter Module FCC ID: M4B6180210.

• This product contains Transmitter Module IC: 5844A-6180210.

• Strictly observe the export control laws of the country for export when exporting this product.

Installing the Ferrite Core (Wireless LAN Model for EU Only)

Install the ferrite core onto the peripheral drive cable to prevent radio interference. Use the ferrite core only for the wireless LAN model in the EU.

①Install the ferrite core onto the peripheral drive cable as shown in the illustration.

Ethernet cable

EU only

Ferrite core (EU only)

②Pass the fastener through the holes in the ferrite core as shown in the illustration.

10 cm (Maximum)

Fastener

EU only

③Loop the fastener around the cable, and then pull the end of the fastener tightly through its buckle. Use a pair of scissors to cut off the excess end of the fastener.

EU only

– 50 –