
10-2. Auto Cutter Specifications
(1) | Cutting frequency | Max. 20 cuts per minute |
(2) | Thickness of paper | 0.065 ~ 0.15 mm |
10-3. Interface
10-4. Electrical Characteristics
(1) | Input Voltage | DC 24 V±10% |
|
(2) | Current Consumption (DC 24 V at room temperature) | ||
| Standby: | Approx. 0.15 A | |
| ASCII printing: | Approx. average 1.8 A | |
|
| (Approx. 17.5% printing rate) | Approx. peak 11.9 A |
| 100% print duty: | ||
|
| (Solid printing): | Approx. average 5.0 A |
(3) | Power Connector | (Continuous solid printing should be 10 seconds or less.) |
Pin No. | Function |
1Drive power (24 V)
2Signal GND
3 | N.C. |
Shell | Frame ground |
<Viewed from Connector Surface>
Note:
• When using a printer power supply other than the optional AC adaptor
• Use a power supply of DC 24 V ±10% and more than 2.0 A (5.0 A Load 10 sec. Min) with LPS output approved by IEC60950.
• Be careful about installing the printer in an area where there is noise. Take the appropriate measures to protect against electrostatic AC line noise, etc.
– 36 –