Temporarily Changing the Top of Form Position

Important

Do not use the platen knob to change the Top of Form. If you turn the platen knob when the printer is turned on, the Top of Form misaligns. Always turn the printer off before turning the platen knob!

To move the Top of Form position lower for one page only:

1Press SEL to deselect the printer.

2Press LF to lower the position of the Top of Form.

Resetting Top of Form to the Factory Default

The factory default setting for the Top of Form (where the printing should begin) is 1" down from the top of the page.

To reset the Top of Form to the factory default:

1Remove paper from the paper path.

2Turn the printer off.

3Press and hold PARK + QUIET/TOF while turning on the printer.

4Reload paper.

16Microline 490/491 User’s Guide

Page 16
Image 16
Oki 490 manual Temporarily Changing the Top of Form Position, Resetting Top of Form to the Factory Default