Cleaning the Housing

You should clean the printer housing every six months (or after about 300 hours of operation).

CAUTION!

Never use strong solvents or strong detergents on the cabinet—they could damage the housing.

1Turn off the printer.

2Use the platen knob to back the paper out of the printer.

CAUTION!

Make sure the printer is turned off before you open the access cover.

3Open the access cover (1) and remove the pull-up roller assembly (2).

4Use a clean, dry cloth to dust around the carriage shaft and platen. Remove any loose bits of paper.

5Reinstall the pull-up roller assembly and close the access cover.

58Microline 490/491 User’s Guide

Page 58
Image 58
Oki 490 manual Cleaning the Housing