Oki PAGE 18 Connect to the Computer PC Systems, Parallel Port, Connection, Cable Requirements

Connect to the Computer:

PC Systems

Parallel Port

Connection

!For the best results, use a bi-directional parallel printer cable marked IEEE 1284-compliant.

1Printer and computer OFF.

2Insert the connector, secure with the clips.

3Connect to the computer; tighten the screws.

!Be sure not to over-tighten the screws–this could damage the screw posts on your computer.

4Turn the printer and computer on.

Cable Requirements

To comply with FCC regulations, the cable must be shielded with twisted pair conductors, and must be UL and CSA approved.

Maximum length for standard bi-directional cable is 6 feet (1.8 meters). For lengths greater than 6 feet, use a cable marked IEEE 1284-compliant.

Printer connector is IEEE 1284-B receptacle (36 pins,

￿0.085" center line).

Port supports bi-directional IEEE 1284 communications (compatibility, nibble, and ECP modes).

Quick Start E-15