Oki PAGE 18 quick start Standard RS232-C Serial Menu Settings

2Insert the connector; secure with the screws.

3Attach to the computer and tighten the screws.

!Be sure not to over-tighten the screws–this could damage the screw posts on your computer.

4Turn the printer and computer on.

!For Serial Interface pin assignments, see Interface in the Specifications section of the User’s Guide.

Cable Requirements

Cable must be shielded with twisted pair conductors and must be UL and CSA approved.

Maximum length for serial cable is 6 feet (1.8 meters).

￿Printer connector is Type 17LE-13250-27 (D4CC) receptacle (25 pins).

Standard RS232-C Serial Menu Settings

Flow Control = DTR Hi

Baud Rate = 9600 Baud

Data Bits = 8 Bits

Parity = None

Min. Busy = 200 mSeconds

!To change any of these settings, see Printer Menus in the Printer Control section of the User’s Guide.

Quick Start E-17