Oki PAGE 6E manual Installing the DOS Operator Panel

Installing the OKIPAGE 6e Software for Windows NT 4.0

✔Do not use Add Printer Wizard.

1.Turn on your computer to start Windows. Make sure the printer is turned off.

2.Insert the disc into the CD-ROM drive.

3.Click Start button from the taskbar.

4.Click Run.

5.Type d:\setup (or the location of your CD-ROM drive), then click OK.

6.Follow the on-screen instructions to install the software.

7.Turn the printer on, then restart Windows to activate the software.

Installing the DOS Operator Panel

If you are running your printer from DOS, install the DOS Operator Panel:

1.Insert the disc into the CD-ROM drive.

2.At the DOS prompt (c:>) type d: <press Enter>.

3.Type d:\ install < press Enter>.

4.Follow the on-screen instructions.

16 Setting Up