Connect to the Computer/Network

Connecting the Parallel Port

The parallel port is a standard IEEE-1284-compatible,

36-pin port. It requires a shielded IEEE-1284-compatible, bi-directional cable no longer than 6 ft. (1.8 m).

1. Open the port access cover.

2.Plug the interface cable into the parallel port and secure it with the wire loops.

3.Close the port access cover, and attach the other end of the cable to the computer and secure it with the screws.

Default settings for the parallel interface (see Section 1 of your on-line Pacemark 4410 User’s Guide for information on changing Menu settings):

I Prime = Buffer Print Pin 18 = +5V

Auto Feed XT = Invalid (Epson FX emulation only) BiDirection = Enable

E-16

Pacemark 4410 Setup Guide