Rolling ASCII Test

To print a Rolling ASCII test:

1.Make sure that continuous form paper at least 9 inches wide is loaded and that the printer is turned off.

Caution! If you have 9-inch paper loaded, be sure that the Page Width menu setting for the paper path you are using is changed from 13.6 inches to 8 inches before starting the Rolling ASCII test. If you don’t, the printhead could be damaged.

2. Press and hold PATH/TOF (1) while turning the printer on.

1

To stop the test, press ON-LINE/RESET.

E-32

Pacemark 4410 Setup Guide