If you have the Forms Tear-Off feature turned on in the menu, before performing the steps below, press and hold TEAR to move the paper into the print position, Then, while holding SHIFT, press TEAR to release the tear, and follow the instructions below.

1.To move the TOF up:

a.Press and hold SHIFT (1) while pressing LF/Micro Feed Down (2).

b.Press and hold SHIFT, then press PATH/TOF to save the setting.

2.To move the TOF down:

a.Press and hold SHIFT (1) while pressing FF/LOAD/Micro Feed Up (3).

b.Press and hold SHIFT, then press PATH/TOF to save the setting.

Resetting Top of Form to the Factory Setting

To reset the TOF to the factory setting, turn the printer off, then press and hold GROUP and OPTION (1) while turning the printer back on.

1

Pacemark 4410 Setup Guide

E-53