Adjusting the Tear-Off Position

The tear-off positions for the front and rear paper paths are set independently.

To adjust the tear-off position for the paper currently in the paper path:

2

1

3

•Hold SHIFT ( 1) and press FF/LOAD/Micro Feed Up (2) repeatedly to move the continuous forms up

•Hold SHIFT ( 1) and press LF/Micro Feed Down (3) repeatedly to move the continuous forms down.

Paper Park Feature

1

When you press PARK (1), the continuous forms currently in the print path retract out of the path and are placed in the parked position (remaining loaded on the tractors, ready to feed in again) and the ALARM light comes on.

To reload the forms, press FF/LOAD.

To load the forms from the alternate paper path, press PATH/TOF.

Pacemark 4410 Setup Guide

E-57