Printer

Features

Preset Menu Configurations

Once you have made changes in Menu settings, you can save them in one of two preset storage areas — CFG1 and CFG2 — and use them instead of the factory settings.

To switch back and forth between stored settings:

1.Press ON-LINE/RESET. The printer goes off line.

2.Press CONFIG.

The CFG designation on the display changes.

3.Press ON-LINE/RESET.

The printer goes back on line with the new CFG showing on the display.

For information on how to store Menu settings as CFG1 or CFG2, see Section 1 of your on-line Pacemark 4410 User’s Guide .

Tear Feature

1

Use this feature to advance continuous forms up to the tear position by pressing TEAR (1).

Pacemark 4410 Setup Guide

E-55