Olympus DS-3000 manual Replacing Batteries, Using the AC Adapter

Replacing Batteries

The battery indicator on the display changes as the batteries lose power.

→ → →

“BATTERY

LOW”

When the batteries are too weak, the recorder shuts down and “BATTERY LOW” appears on the display.

When appears on the display, replace the batteries as soon as possible. AAA alkaline batteries* are recommended.

*The two AAA alkaline batteries provide approximately 11 hours of continuous recording and playback. Battery life depends on the operating environment and other conditions.

Using the AC Adapter

PLAY
	INDEX
STOP
FOLDER	ERASE
/MENU

Notes

•Be sure to stop the recorder before replacing the batteries. Unloading the batteries while the recorder is recording, erasing or otherwise accessing an audio file may corrupt the file.

•Be sure to replace both batteries at the same time.

•Never mix old and new batteries, or batteries of different types and/or brands.

•If it takes longer than 3 minutes to replace dead batteries, you may have to reset the time when you load fresh batteries.

•Remove the batteries if you are not going to use the recorder for an extended period of time.

•Stop the recorder before disconnecting the AC adapter.

•When not using the recorder, always disconnect the AC adapter from the power outlet.

•Use only the correct power supply voltage as indicated on the adapter.

Replacing Batteries/Using the AC Adapter

Plug the optional AC adapter (Olympus Model
A321 or A322) into household power outlet and
connect the power plug to the recorder’s power
connector (DC 3 V) as shown in the illustration.
Do not connect the AC adapter to the recorder
during recording. Always stop recording before
connection. Otherwise it may not be possible
to play back the voice data being recorded.	11