Open the Case
1Slide and hold the slide lock towards the arrow direction (1) and turn the open/close dial counter clockwise (2).
2Turn the open/close dial to the position where it cannot be turned further.
3Open the rear lid of the Case gently.
Slide lock
1
CAUTION:
2
Do not exert too much force while turning the open/close dial. Doing so may damage the dial.
Attach the digital camera to the camera table
In order to load the camera into the Case, attach the camera table (located on the
1The eyecup and the hot shoe cover of the digital camera can be stored in the camera table.
2Attach the camera table to the tripod seat section on
the bottom of the digital camera. Use the camera’s tripod screw hole for attaching.
En
3 The camera table has fixed | Front |
orientations. To ensure that it is properly attached, |
|
refer to the illustration on the right. |
|
| Up |
| Down |
| Rear |
EN 15