Olympus E06 Dry the Case

Dry the Case

After washing with pure water, use a lint-free soft cloth without any salt on it to wipe off any waterdrop and dry the Case completely at a well ventilated location in the shade.

CAUTION:

Do not use hot air from a hair drier or the like for drying and do not expose the Case to direct sunlight, as this may accelerate deterioration and deformation of the Case and deterioration of the O-ring, leading to leakage of water.

When wiping the Case, take care not to cause scratches.

EN 21

Contents

En Instruction Manual Introduction Please read the following items before use For safe use Page Page Contents Page 1. Preparations Check the contents of the package Page Install the Waterproof Port Attach the hand strap How to attach and detach the camera table 2. Advance check of the Case Advance check before use 3. How to connect the electronic flash Connecting the underwater optical fiber cable When using the TTL cable Page 4. Installing the digital camera Check the digital camera Open the Case Attach the digital camera to the camera table Insert the digital camera in the Case Check the loading status Seal the Case Check the operation of the loaded camera Perform the final checks Water Leakage Test 5. Handling After Shooting Wipe off any waterdrop Unload the digital camera Wash the Case with pure water Dry the Case 6. Maintaining the Waterproof Function Remove the O-ring Remove any sand, dirt, etc Install the O-ring How to Apply Grease to the O-ring Replace consumable products Maintenance of the threaded sections on the TTL cable and TTL cable connector Maintenance of the TTL Connector Cap 7. Appendix Specifications