Manuals / Brands / Cell Phone / Carrying Case / Olympus / Cell Phone / Carrying Case

Olympus E06 1. Preparations, Check the contents of the package

1 30

Check that all accessories are in the box.

Contact your dealer if accessories are missing or damaged.

• Hand strap

• Silica gel (2g)

• Case body		• Silicone grease
(Check that the O-ring is installed on		• Silicone grease
both of rear case and front case.)	• O-ring remover
	• O-ring remover
		• Maintenance adapter
	•	Authorized distributors list/Authorized
		service centres list
	•	Instruction manual (this manual)

CAUTION:

After purchase, be sure to do maintenance even in brand-new condition. Neglecting the maintenance may become the cause of water leakage.

For how to maintenance the case, refer to P.22.

EN 6

Contents

En Instruction Manual Introduction Please read the following items before use For safe use Page Page Contents Page 1. Preparations Check the contents of the package Page Install the Waterproof Port Attach the hand strap How to attach and detach the camera table 2. Advance check of the Case Advance check before use 3. How to connect the electronic flash Connecting the underwater optical fiber cable When using the TTL cable Page 4. Installing the digital camera Check the digital camera Open the Case Attach the digital camera to the camera table Insert the digital camera in the Case Check the loading status Seal the Case Check the operation of the loaded camera Perform the final checks Water Leakage Test 5. Handling After Shooting Wipe off any waterdrop Unload the digital camera Wash the Case with pure water Dry the Case 6. Maintaining the Waterproof Function Remove the O-ring Remove any sand, dirt, etc Install the O-ring How to Apply Grease to the O-ring Replace consumable products Maintenance of the threaded sections on the TTL cable and TTL cable connector Maintenance of the TTL Connector Cap 7. Appendix Specifications