6Jumping into the water with the Case in your pocket or in your hand, throwing the Case from a boat or ship into the water, and other rough handling may cause water leakage. Please handle with sufficient care, when handing it over from hand to hand etc.

7If the camera on the inside should become wet because of water leakage etc., immediately wipe off all moisture and confirm the operation.

8Be careful not to apply excessive force to the port connector, TTL cable connector, zoom dial or tripod seat.

9Do not push the air vent valve from inside.

0Please remove the O-ring when traveling by air. Otherwise air pressure may make it impossible to open the Case.

aFor safe use of the digital camera in this product, please read the “Instruction Manual” for the digital camera carefully.

bWhen sealing this product, take sufficient care that no foreign matter gets caught at the O-ring and the contact surfaces.

cThe camera’s built-in flash cannot be used when the Case is combined with an external Olympus flash. Also, the camera’s built-in flash cannot be popped up if the hot shoe cable is connected to the camera’s hot shoe. If the built-in flash is forcibly popped up, the connected flash will not work properly and the hot shoe cable may be disconnected from the camera’s hot shoe. In this case, the camera may also be damaged.

dThe camera’s built-in flash cannot be used when the camera is in the Case.

En

EN 3