Using the recorder on your PC

Disconnecting from your PC

Windows

1 Click [ ] on the task bar located at the lower-right corner of the

screen. Click [Safely remove USB Mass Storage Device]

•The drive letter will differ depending on the PC being used.

2 Be sure that the recorder [PEAK] indicator light (R) is off before disconnecting the USB cable

•The [PEAK] indicator light (R) will light up orange while the recorder is charging. The USB cable may be removed during the charging operation.

Macintosh

1 Drag and drop the drive icon for this recorder displayed on the desktop to the Recycle Bin icon

2 Make sure that the recorder [PEAK] indicator light (R) is off before disconnecting the USB cable

•The [PEAK] indicator light (R) will light up orange while the recorder is charging. The USB cable may be removed during the charging operation.

7

PC your on recorder the Using

Note

•NEVER disconnect the USB while the [PEAK] indicator light (R) is flashing. If you do, the data may be destroyed.

•When the recorder is connected to a PC, the power will be supplied from the USB cable supplied with the recorder. No power supply is required from the batteries or the AC adapter to this recorder.

•For more information on the USB port on your PC, refer to the user's manual for your PC.

•Be sure to connect the USB cable directly to the USB port on your PC.

•Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.

•Release the recorder from HOLD.

EN

119