Inserting and Removing the SD Card

Inserting the SD card

“SD” in this manual refers to SD, SDHC and SDXC.

Commercially-available SD cards can be used in this recorder.

1 Slide the lock switch to [OPEN] when the recorder is stopped and open the SD card cover.

2 Insert the SD card.

Terminal surface

card is inserted all the way in. 3 Close the SD card cover.

•After closing the SD card cover, slide the lock switch to [LOCK].

•When the SD card is inserted, the recording media switching screen appears.

4 To record data in the SD card, select [Yes] by pressing the + or − button.

5 Press the OK button to complete setting.

Note

•The recording medium can be switched to the built-in memory (☞ p.107).

•The recorder may not recognize an SD card formatted (initialized) on a PC or other device. Be sure to format your SD card on this recorder (☞ p.113).

2

Card SD the Removing and Inserting

•Insert the SD card with the terminal face facing up, as shown in the figure.

•If the SD card is inserted in the wrong direction or at an angle, the contact face may be damaged or the SD card may get stuck.

• Recording cannot start unless the SD

EN

 

29