Before Recording

3

Recording Before

To achieve a good recording quality, it is important to properly adjust the settings, including the [Mic Gain] of the input source (☞ P80) and the [Rec Level] (☞ P.81).

▌Adjusting the recording level properly

Recorded sound will be distorted if the recording level meter swings all the way to the right, or the PEAK indicator (R) lights in orange. Adjust the recording level so that the recording level meter does not exceed [-6dB].

 

 

 

 

 

 

 

 

Press the REC button to enter the

 

 

 

 

 

 

 

1 recording standby mode.

 

 

 

 

 

 

 

 

• The recording indicator and [≠] on

 

 

 

 

 

 

 

 

the display will flash, and the device

 

 

 

 

 

 

 

2

enters the recording standby mode.

 

 

 

 

 

 

 

Adjust the recording level with the

 

 

 

 

 

 

 

REC LEVEL dial.

 

 

 

 

 

 

 

 

• Adjust the REC LEVEL dial according to

 

 

 

 

 

 

 

 

the sound source.

 

 

 

 

2

A

 

 

 

 

 

 

 

 

 

 

 

 

 

• The REC LEVEL dial can separately adjust the

 

 

 

 

 

 

 

level of the input source for the L/R chan-

 

 

 

 

 

 

 

nels. The larger the number is, the higher the

 

 

 

 

 

 

 

recording level is, and the more the level meter

 

 

 

 

 

 

 

is pushed further to the right.

 

 

 

 

 

 

 

• Recording when the level meter is way past the

 

 

 

 

 

 

 

peak may result in noise, even if the [Rec Level]

 

 

 

 

 

 

 

is set to [Auto] or [Limiter On] (☞ P.81). Make a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

test recording to see if the recording level is set

properly.

The level meter is maxed out (the sound will be distorted).

EN

36