Creating a Multi-Track Project

9

Repeat steps 3 to 6 to add more sound sources to empty

tracks.

5Press the REC button to start recording.

•Listening to the playback, press the REC button. The recording will be made on the track specified in step 1.

6Press the STOP button to stop recording and playback.

4

10 Bounce the tracks

This recorder allows you to save up to 8 tracks under 1 project. Once you run out of empty tracks, create bounce files and assign them to tracks.

You can bounce any of the files that are currently assigned to tracks.

1 Press the preassigned Fn (Bounce) button.

• The option of bouncing files becomes available once you set the "Track Assignment" (+ P.62).

• Be sure to assign the [Bounce] function to the Fn button in advance (+ P.106).

2 Press the + button to select [Start]. 3 Press the OK button.

• An animation will appear on the display, and bouncing starts.

• [Bounce] appears when the bouncing is complete. It will be saved as a new PCM format [44.1kHz/16bit] file under the same project.

Project Track-Multi a Creating

EN

63