File menu [File Menu]
5 [Menu] { [File Menu] { [Bounce]
6 Press the OK button.
•The bounce check window appears.
7 Press the + button to select [Start].
A
•When [Bounce] (+ P.106) is set to the Fn button, pressing the allocated button starts the bounce process.
Caution
•[Bounce] does not function in the recorder mode.
6
Menu File
8 Press the OK button.
•The animation is displayed on the screen, and the bounce process starts. [When [Done] is displayed, bouncing is finished.
•When the bounce process completes, the new PCM format [44.1kHz/16bit] file is saved in the project.
EN
99