Inserting and Removing the SD Card
Removing the SD card
2
and Inserting |
| |
SDtheRemoving | Press the SD card all the way into the | |
| ||
| recorder and slowly pull it out. | |
Card | • If [SD card] is selected in [Memory Select], | |
the [Internal memory selected] message | ||
| ||
| is displayed. |
SD card
If the SD card is in the write protection mode, the [SD card is locked] message is displayed.Clear write protection before inserting the card.
When the write protection switch is set | |
to [LOCK], recording |
|
or other operations |
|
cannot be performed. | LOCK |
| |
EN
Note
•When you remove the SD card, it may swiftly pop out if you suddenly take away your finger that was pushing the SD card or push the SD card out by flipping it.
•The recorder may not correctly recognize some SD, SDHC or SDXC cards depending on the manufacturer or card type due to compatibility.
•Be sure to read the attached SD card manual before use.
•If the SD card is not recognized, remove the SD card and then insert it again to see if the recorder recognizes it.
•The processing speed may become lower de- pending on the type of SD card. The processing performance may deteriorate if the SD card is repeatedly written to or deleted. In such a case, initialize the SD card again (☞ p.113).
•For the SD cards certified according to our standards, refer to the support page on our Web site:
Although the manufacturers and types of SD cards whose operation we have certified are listed on our Web site, operation of these SD cards is not guaranteed. Note that it may become impossible to correctly recognize a listed card due to specification changes by the manufacturer or other reason.
30