|
| Recording | |
| Recording using the metronome | ||
| You can use the metronome to help you keep | ||
| accurate tempo during recording. | ||
3 | 1 |
| Set [REC Mode] to [Normal] |
| (+ P.79). | ||
Recording | 2 |
| Select [Detail] from [Metronome |
| Menu], and set [Display] to [ON] | ||
|
|
| (+ P.100). |
• You can change the tempo and pattern of the metronome in [Detail] under [Metronome Menu] (+ P.100).
3 Connect headphones to the EAR jack of the recorder.
4
•If [Countdown] is set, recording starts after the set count.
EN
5 Press the STOP button to stop recording.
•When you stop recording, the metronome will stop as well.
▌Important Notes on Recording
•When you have an SD card inserted in the recorder, make sure to check if your memory selection is set to [Internal memory] or [SD card] (☞ P.107).
•To prevent losing the beginning of your record- ing, make sure the PEAK indicator light (R) is lit before recording.
•When the remaining recording time is down to 60 seconds, the PEAK indicator light (R) starts flashing; as the time winds down (to 30 seconds, 10 seconds, etc.), the light starts to flash faster.
•No more recordings can be made when [Folder full] appears. Select another folder, or delete unnecessary files before continuing to record (☞ P.50).
•No more recordings can be made when
[Memory full] appears. Delete unnecessary files before continuing to record (☞P.50).
•The performance of the recording medium may decrease after repeated writing and erasing. When this occurs, try formatting the recording medium (☞ P.113).
44