Troubleshooting

8

Troubleshooting

EN

126

Symptom

Probable cause

 

Action

 

 

 

 

 

Cannot recharge

[Battery] is set to [Alkaline].

Use the supplied rechargeable batteries.

 

 

 

 

 

Cannot find files

Wrong folder.

Switch to the correct folder (page 37).

 

 

 

 

 

 

The recorder was wiped or shaken

 

 

 

Noise heard during

during recording.

 

 

 

 

 

 

 

The recorder was placed near a cell

 

 

 

playback

 

 

 

 

phone or fluorescent lamp while

Move the recorder.

 

recording or during playback.

 

 

 

 

 

 

 

 

 

The file is locked.

Unlock the file (page 90).

Unable to erase a file

 

 

 

 

The file is read-only.

Unlock the file or cancel the read-only setting of the

 

 

file on the PC.

 

 

 

 

 

 

 

Unable to erase a

There is a file that cannot be

 

 

 

recognized by the recorder in the

Connect the recorder to your PC and erase the folder.

folder

folder.

 

 

 

 

 

 

 

 

 

 

 

 

No sound is produced

The track is muted.

Cancel the mute condition (page 61).

 

 

 

 

from a certain track in

 

 

 

 

The output volume of the track

 

 

 

the multi-track mode

Increase the output volume of the track (page 61).

 

is reduced.

 

 

 

 

 

 

 

 

 

 

[Input Select] is incorrectly

Make sure the [Input Select] is correctly set (page

 

set.

82).

 

 

No sound from the

 

 

 

 

 

Use the [Rec Level] dial to adjust the recording level (

connected musical

The recording level is low.

page 37).

instrument

 

 

 

 

 

 

[ The [Rec Monitor] is set to

Set the [Rec Monitor] to [ON] (page 87).

 

[OFF].

 

 

 

 

 

 

 

 

 

CD writing is not

The selected file is not enabled for

Select a PCM format [44.1kHz/16bit] file that is

available

CD writing.

enabled for CD writing.

 

 

 

 

 

Cannot be converted

The selected file is not enabled to

Select a PCM format [44.1kHz/16bit44.1kHz] file that

to an MP3 file

be converted to an MP3 file.

is enabled to be converted to an MP3 file.

 

 

 

 

 

 

The volume of the track is either

Check the volume of the track and the [ON/OFF] of the

Cannot perform

completely reduced or muted.

mute (page 61).

 

 

 

 

bouncing

The SD card does not have enough

 

 

 

 

Erase unnecessary files (page 50).

 

free space.

 

 

 

 

 

 

 

 

 

Cannot use the tuner

[Input Select] is incorrectly

Check the connected musical instrument to set the

set.

[Input Select] correctly (page 82).