Olympus MR-100 EN-28, Setting the HOLD function of the device to ON, –HOLD function, To set HOLD to OFF, Using the HOLD switch

Using the HOLD switch

operations Basic

Using the HOLD switch

–HOLD function

This is used to prevent unintentional operations when carrying your m:robe in a pocket or a bag.

Setting the HOLD function of the device to ON

Slide the HOLD switch to follow the direction of the arrow on your m:robe.

ON

DL

OH

The display disappears and the touch panel becomes inactive.

When the HOLD status is ON, “” is displayed on the display. Refer to “PLAYBACK display” (gpage 33).

To set HOLD to OFF

To operate the m:robe again, slide the HOLD switch in the reverse direction of the arrow.

“” disappears on the display.

EN-28