
information Additional
Troubleshooting
Before sending the product for repair, refer to the following checklist to resolve the problem. If the problem persists, contact your nearest Olympus service center.
In addition, be sure to back up the data in your m:robe before sending this product for repair or service. Writing to the hard disk or deleting data etc., may be necessary during the repair or service. Due to copyright restrictions, we cannot copy stored data for repair or service. Restoring the data is not possible. We also recommend backing up your data often, by synchronization, to prevent data loss problems.
Problem | Cause | Resolution | Page |
|
|
|
|
The power cannot be | The HOLD function is set | Slide back the HOLD | gpage 28 |
turned on. | to ON. | switch to release the |
|
|
| HOLD function. |
|
|
|
|
|
The player turns off | OFF TIMER is set. | The POWER is turned off | gpage 46 |
automatically. |
| automatically after the |
|
|
| setting time of OFF |
|
|
| TIMER has elapsed. Set to |
|
|
| “OFF” to disable the OFF |
|
|
| TIMER setting. |
|
|
|
|
|
| The Auto Off function is | 3 minutes after playback | gpage 27 |
| activated. | stops, the power turns off |
|
|
| automatically. |
|
|
| Press the POWER to turn |
|
|
| the device on. |
|
|
|
|
|
Nothing is on the display. | The battery is empty. | Charge the battery with the | gpage 18 |
|
| supplied AC adapter. |
|
|
|
|
|
The display is not clear. | The battery is empty. | Charge the battery with the | gpage 18 |
|
| supplied AC adapter. |
|
|
|
|
|
| The LCD brightness setting | Adjust settings of the LCD | gpage 46 |
| is too low. | CONTRAST. |
|
|
|
|
|
The display and the LED | The backlight is set to turn | Set the desired time or | gpage 46 |
lights are turned off. | off. | change “BACKLIGHT” to |
|
|
| “ON”. |
|
|
|
|
|
The display does not turn | The HOLD function is set | Slide back the HOLD | gpage 28 |
on. | to ON. | switch to release the |
|
|
| HOLD function. |
|
|
|
|
|