Omega manual OME-PIO-D144 User’s Manual Ver.2.1, Sep/2001

Step3: The user can identify the specified PIO/PISO card if they compare the wSlotBus & wSlotDevice in step2 to step1.

The simplest way to find the card number is to use DEM10.EXE given in DOS or WINDWS demo program.

This demo program will send a value to D/O of CN2 and read back from D/I of CN3. If the user installs a 50-pin flat-cable between CN2 & CN3, the value read from D/I will be the same as D/O. The operation steps are given as follows:

1.Remove all 50-pin flat-cable between CN2 and CN3

2.Install all OME-PIO-D144 cards into this PC system

3.Power-on and run DEM10.EXE

4.Now all D/I value will be different from D/O value

5.Install a 50-pin flat cable into CN2 & CN3 of any OME-PIO-D144 card

6.There will be one card’s D/I value = D/O value, the card number is also show in screen

Therefore the user can find the card number very easily if they install a 50-pin flat-cable into OME-PIO-D144 sequentially.

OME-PIO-D144 User’s Manual (Ver.2.1, Sep/2001) ----- 27