Omega OME-PIO-D144 manual Demo10 Find Card Number

4.8Demo10: Find Card Number

/* -------------------------------------------------------------		*/
/* demo 10: Find card number		*/
/* step 1 : run demo10.exe		*/
/* step 2	: connect a 50-pin flat-cable to CON2 & CON3 of card_? */
/* step 3	: The card number is shown in screen as TEST OK	*/
/* -------------------------------------------------------------		*/

#include "PIO.H"

WORD wBase,wIrq;

WORD wBoards,wRetVal;

WORD wBase,wIrq,wSubVendor,wSubDevice,wSubAux,wSlotBus,wSlotDevice;

int main()

{

int i,j,k;

char c;

clrscr();

PIO_DriverInit(&wBoards,0x80,0x01,0x00); /* for OME-PIO-D144 */ printf("\n(1) Threr are %d OME-PIO-D144 Cards in this PC",wBoards); if ( wBoards==0 )

{

putch(0x07); putch(0x07); putch(0x07);

printf("(1) There are no OME-PIO-D144 card in this PC !!!\n");

exit(0);

}

printf("\n(2) The Configuration Space -> wBase"); for(i=0; i<wBoards; i++)

{

PIO_GetConfigAddressSpace(i,&wBase,&wIrq,&wSubVendor,&wSubDevice, &wSubAux,&wSlotBus,&wSlotDevice);

printf("\nCard_%d: wBase=%x,wIrq=%x,subID=[%x,%x,%x],SlotID=[%x,%x]" ,i,wBase,wIrq,wSubVendor,wSubDevice,wSubAux,wSlotBus,wSlotDevice);

}

PIO_GetConfigAddressSpace(0,&wBase,&wIrq,&wSubVendor,&wSubDevice,

for (;;)	&wSubAux,&wSlotBus,&wSlotDevice);
{	press any key to stop	-------------");
printf("\n-------------
for (i=0; i<wBoards; i++) test_card(i);
delay_ms(1000); /* delay 1 sec */
if (kbhit()!=0) {getch(); break;}
}
PIO_DriverClose();
}
/* -----------------------------------------------------------		*/

test_card(int card)

{

int i,j,k,ok,val;

PIO_GetConfigAddressSpace(card,&wBase,&wIrq,&wSubVendor,&wSubDevice,

	&wSubAux,&wSlotBus,&wSlotDevice);
outp(wBase,1);	/* enable D/I/O	*/

OME-PIO-D144 User’s Manual (Ver.2.1, Sep/2001) ---- 48