Omega Engineering CN9400 specifications Program security using Lock, Prog Auto StAY

LEVEL 4

Access to level 4 is gained through	VER in level 3.
Press and hold ▲ and ▼
for 10 seconds.
Enter level 4 at Lock, release ▲ and ▼ together.

Display reads	LOCK
	NONE

Program security using Lock

Select from three Lock options:

Press and hold ✱, press ▲ to index.

LEV.3 locks level 3 and 4 only- Technical Functions.

LEV.2 locks levels 2, 3 and 4 only - Configuration and Technical Functions.

ALL	locks all functions	LOCK
		ALL
Note:	Locked functions and options may be read.

Function Options [Factory settings] shown in brackets

Press ▼ to access following functions

PROG [Auto] StAY

Program mode auto-exit switch

Auto-exit returns display to normal if 60 seconds of key inactivity, select StAY to disable

NO.AL [oFF] on

Disable SP2 alarm annunciator -AL-

Select on to disable -AL-

DIS.S dir 1 to 32 [6]

Display sensitivity

dir = direct display of input

1= maximum, 32 = minimum sensitivity

DER.S 0.1 to 1.0 [0.5]

Derivative sensitivity

F u n c t i o n L i s t

✂	IMPORTANT NOTE FOR OEM’s: For safety and to protect settings from tampering
	USE THE SOFTWARE SECURITY LOCK.... THEN REMOVE THIS SECTION.

21