1.Introduction
The OME-PIO-D96 provides 96 TTL digital I/O lines. The OME-PIO-D96 consists of four 24-bit bi-directional ports. Each 24-bit port supports three 8-bit groups PA, PB & PC. Each 8-bit group can be configured to function as either inputs or latched outputs. All groups are configured as inputs upon power-up or reset.
The OME-PIO-D96 has one D-Sub connector and three 50-pin flat cable headers. Each header can connect to a 50-pin flat cable. The flat cable can be connected to OME-ADP-37/PCI or OME-ADP-50/PCI adapter. The adapter can be fixed on the chassis. It can be installed in 5V PCI bus and supports “Plug & Play”.
1.1Features
•PCI bus
•Up to 96 channels of digital I/O
•All I/O lines buffered on the board
•Eight-bit groups independently selectable for I/O on each 24-bit port
•Input/ Output programmable I/O ports under software control
•SMD, short card, power saving
•Connects directly to OME-DB-24P, OME-DB-24PR, OME-DB-24PD, OME-DB- 24RD, OME-DB-24PRD, OME-DB-16P8R, OME-DB-24POR, OME-DB-24SSR, OME-DB-24C
•Each board = 4 connectors = 4×3 ports = 4×3×8 bits =96 bits
•4 interrupt sources: P2C0,P5C0,P8C0,P11C0 (Refer to sec. 2.7)
•One D-sub connector, three 50-pin flat cable connectors
•Automatically detected by windows 95/98/NT/2000/XP
•No base address or IRQ switches to set
