Omega Engineering OME-PIO-D96 manual DEMO1

4.2	DEMO1	*/
/* demo 1	: D/O demo of CN1
/* step 1	: connect a OME-DB-24C to CN1 of OME-PIO-D96	*/
/* step 2	: run DEMO1.EXE	*/

/* step 3 : check the LEDs of OME-DB-24C will turn on sequentially*/
/* -------------------------------------------------------------- */
#include "PIO.H"
WORD wBase,wIrq;
main()
{	i1,i2,i3;
int
long	i=1;
WORD	wBoards,wRetVal,t1,t2,t3,t4,t5,t6;
WORD	wSubVendor,wSubDevice,wSubAux,wSlotBus,wSlotDevice;
char	c;

clrscr();
/* step1 : find address-mapping of PIO/PISO cards	*/
wRetVal=PIO_DriverInit(&wBoards,0x80,0x01,0x10);	/* for OME-PIO-D96

*/

printf("\n(1) Threr are %d OME-PIO-D96 Cards in this PC",wBoards); if ( wBoards==0 ) exit(0);

printf("\n\n--------------	The Configuration Space	--------------");
for(i=0;i<wBoards;i++)

{

PIO_GetConfigAddressSpace(i,&wBase,&wIrq,&wSubVendor,&wSubDevice printf("\nCard_%d: wBase=%x,wIrq=%x,subID=[%x,%x,%x],

SlotID=[%x,%x]",i,wBase,wIrq,wSubVendor,wSubDevice,

wSubAux,wSlotBus,wSlotDevice); printf(" --> "); ShowPioPiso(wSubVendor,wSubDevice,wSubAux);

}

PIO_GetConfigAddressSpace(0,&wBase,&wIrq,&t1,&t2,&t3,&t4,&t5);

/* step2 : enable all D/I/O port	/* select card_0 */
	*/
outportb(wBase,1);	/* /RESET -> 1 */
/* step3 : configure I/O direction	*/
outportb(wBase+0xcc,0x07);	/* set CN1 as D/O ports */
for (;;)
{
i1=i&0xff;
i2=(i>>8)&0xff;
i3=(i>>16)&0xff;
outportb(wBase+0xc0,i1);
outportb(wBase+0xc4,i2);
outportb(wBase+0xc8,i3);
delay(10000);
i=i<<1;
i=i&0x0ffffff;
if (i==0) i=1;
if (kbhit()!=0) return;
}
PIO_DriverClose();
}

OME-PIO-D96 User Manual (Ver.1.1, Mar/2003) ---- 39