Omnitron Systems Technology 10/100M user manual Vlan ID

3.4.3Management Processor VLAN Support

The 10/100M Management Processor can independently transmit and receive Management Data with an IEEE 802.1Q tag. To enable and configure this feature, type 9 from the Management Options screen to access the Other Networking Features screen.

Management Options			iConverter, Serial Agent
Network Management
1: Chassis and Module Management
2:	Set Module Identifier
Management Module Preferences
3: IP and Control Preferences
4:	SNMP Preferences
5:	Abandon Preference Changes
6:	Save Preference Changes
7: Restore to Factory Defaults
8:	Restart Management Module
9:	Other Networking Features
Management Module Maintenance
10: Firmware Update
11: Set Date/Time
IP Address		= 192.168.1.220
Chassis Number = 1
Enter Choice, (H)elp, E(x)it > 9
Other Networking Features Screen			iConverter, Serial Agent
1:	Enable/Disable DHCP Client		Disabled
2:	Enable/Disable Keep Alive Trap		Disabled
3:	Keep Alive Trap interval (10-600 secs)		10
4:	Enable/Disable SW1 Switch Block		Enabled
5:	Serial Baud Rate		57600 bps
6:	Enable/Disable VLAN Support		Disabled
7:	VLAN ID (0-4095)		2
8:	VLAN Priority (0-7)		7

Enter Choice, Management Options Screen(0), (H)elp, E(x)it >

To configure the VLAN management ID, select option 7. To configure the priority setting for the VLAN management channel, select option 8. To enable or disable VLAN management support, select option 6.

Once VLAN support is enabled, IP management support will only be accessible using the configured

VLAN ID.

To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then select 6 and press <ENTER> to Save Preference Changes.

3.4.4Enabling/Disabling Soft-switch Reload

The Soft-switch Reload function controls the configurations of the 10/100M and other iConverter modules managed by the 10/100M following a power up.

When the Soft-switch Reload is disabled, the configurations of the 10/100M and the other managed modules

Page 19