Omnitron Systems Technology 10/100M user manual Installation Procedure

19-Module Chassis

5-Module Chassis 2-Module Chassis

1-Module Redundant Chassis

3.0INSTALLATION PROCEDURE

3.1OVERVIEW

The following steps outline the installation and configuration procedures for the 10/100M. Refer to the specified sections for detailed instructions.

•Configure DIP-switches (Section 3.2)

•Installing the Module and Connecting Cables (Section 3.3)

•Configure Module via Command Line Interface (Section 3.4)

•Verify Operation (Section 3.5)

When the setup and configuration procedures are completed, the 10/100M has been configured with the basic setup requirement for standard operation. To configure the module with additional features, see Section 4.0, “Detailed Module Configuration”.

Page 5