Omnitron Systems Technology 10/100M user manual

(non-management modules) are determined by their hardware DIP-switch settings following a return of power.

When the Soft-switch Reload is enabled, the configurations of the 10/100M and the other managed modules are determined by the previous software settings stored in the FLASH memory of the 10/100M following a return of power. Each of the hardware DIP-switch settings on the module are ignored until a change is made to the DIP-switch, then the hardware settings will take effect.

To set the Soft-switch Reload function, select 8 at the IP and Control Preferences screen, press <ENTER> and then follow the screen prompts to change the setting.

IP and Control Preferences Screen			iConverter, Serial Agent
1:	Set IP		192.168.1.220
2:	Set Subnet Mask		255.255.255.0
3:	Set Gateway		192.168.1.1
4:	Chassis Number		1
5:	Chassis Name (also sysName)		10/100M
6:	Enable/Disable TELNET		Enabled
7:	Enable/Disable FTP		Disabled
8:	Enable/Disable Soft Switch Reload		Disabled
9:	TELNET Password		*****
10: FTP		Password
11: Serial Password

Enter Choice, Management Options Screen(0), (H)elp, E(x)it >

To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then select 6 and press <ENTER> to Save Preference Changes.

Page 20