Omnitron Systems Technology GX/TM user manual 1.2 SW2 UTP Auto/Manual Negotiation AN/Man

NOTE: When the fiber optic port operates in Auto-Negotiation mode, the port advertises for Pause. When the fiber optic port operates in Manual mode, Pause is disabled.

NOTE: The fiber optic port of the GX/TM works in Full-Duplex mode in both Auto and Manual Negotiation modes.

3.2.1.2SW2 - UTP Auto/Manual Negotiation “AN/Man”

When this DIP-switch is in the “AN” position (factory default), the UTP port automatically determines the Speed, Duplex and Pause mode of the connecting UTP device. If the connecting UTP device cannot provide the proper signal to indicate its own mode of operation, then the DIP-switch should be set to the Manual mode “Man” position. Manual mode requires manually configuring the UTP port to match the Speed and Duplex mode of the connecting UTP device using the “10/100” and “FDX/HDX” DIP-switches.

PI

SA

SW2	SW3	SW4	SW5	UTP Mode of Operation
AN	1000	100	FDX	Configured for Auto Negotiation.
		or		It advertises and negotiates in this order:
		10		1000F, 1000H, 100F, 100H, 10F, 10H
AN	1000	100	HDX	Configured for Auto Negotiation.
		or		It advertises and negotiates in this order:
		10		1000H, 100F, 100H, 10F, 10H
AN	10-100	100	FDX	Configured for Auto Negotiation.
				It advertises and negotiates in this order:
				100F, 100H, 10F, 10H
AN	10-100	100	HDX	Configured for Auto Negotiation.
				It advertises and negotiates in this order:
				100H, 10F, 10H
AN	10-100	10	FDX	Configured for Auto Negotiation.
				It advertises and negotiates in this order:
				10F, 10H
AN	10-100	10	HDX	Configured for Auto Negotiation.
				It advertises and negotiates in this order:
				10H
MAN	1000	100	FDX	Configured for Auto Negotiation.
		or		It advertises and negotiates in this order:
		10		1000F, 1000H, 100F, 100H, 10F, 10H.
				When the port is set to 1000, it is always in
				AN mode.
MAN	1000	100	HDX	Configured for Auto Negotiation.
		or		It advertises and negotiates in this order:
		10		1000H, 100F, 100H, 10F, 10H.
				When the port is set to 1000, it is always in
				AN mode.
MAN	10-100	100	FDX	Port forced to 100 FDX
MAN	10-100	100	HDX	Port forced to 100 HDX
MAN	10-100	10	FDX	Port forced to 10 FDX
MAN	10-100	10	HDX	Port forced to 10 HDX

UTP Port Configuration Matrix

Page 7