CONNECTIONS

Connection to an Audio System

When you change the connections, all devices should be turned off.

Refer to the manual accompanying external devices for more information.

2-Channel Analog Audio Connection

stereo system

audio

this unit

AUDIO IN

R L

analog audio input jacks

RCA audio cable

AUDIO OUTPUT (DOWN MIX L/R)

Digital Audio Connection

AV receiver / amplifier

audio

DIGITAL AUDIO INPUT

DIGITAL AUDIO INPUT

 

OPTICAL

COAXIAL

digital audio

digital audio

optical input jack

coaxial input jack

 

or

digital audio

digital audio

optical cable

coaxial cable

this unit

AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL)

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

Note for Digital Audio Optical Cable

Digital audio optical cable may be damaged when bent at sharp angles. Endure cables are coiled in loops with a diameter of 6 inches (15cm) or more when storing them.

Use a cable which is 9.8 feet (3m) or shorter.

Insert cable plugs firmly into the connectors when making connections.

If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

Note

When connecting to a 2-channel audio stereo device, use the AUDIO OUTPUT (DOWN MIX L/R) jacks. If the AUDIO OUTPUT (ANALOG 7.1ch) jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to page 38). For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels are output. (For sources which are prohibited from down-mixing, only the FRONT L/R signals are output.)

16

EN

Page 16
Image 16
Onkyo BD-SP807 instruction manual Connection to an Audio System, Channel Analog Audio Connection, Digital Audio Connection