Onkyo BD-SP807 instruction manual Audio Supplied cables used in this connection are as follows

CONNECTIONS

■Audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks

For the settings in the “Digital Out” to take effect, “HDMI Audio Out” should be set to “Audio Mute”. Otherwise, the settings made in the “HDMI Audio Out” will have a priority, and the same signal as being output from the HDMI OUT jack will be output from the AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks as well. (Except that Dolby Digital will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.)

“Digital Out” setting “Bitstream”

“LPCM”

		“BD Audio Mode”setting	“HD Audio Output”	“Mix Audio Output”	“HD Audio Output”	“Mix Audio Output”
	Media	Audio Source	Which audio format can be output depends on the compatibility of the connected device.
		Dolby Digital	Dolby Digital	Dolby Digital	Downmix 2ch PCM	Downmix 2ch PCM
		Dolby Digital Plus	Dolby Digital	Dolby Digital	Downmix 2ch PCM*1	Downmix 2ch PCM*2
BD-video		Dolby TrueHD	Dolby Digital	Dolby Digital	Downmix 2ch PCM*3	Downmix 2ch PCM*4
		DTS	DTS	DTS	Downmix 2ch PCM	Downmix 2ch PCM
		DTS-HD	DTS	DTS	Downmix 2ch PCM*1	Downmix 2ch PCM*5
		LPCM	Downmix 2ch PCM	Downmix 2ch PCM	Downmix 2ch PCM	Downmix 2ch PCM
AVCHD		Dolby Digital	Dolby Digital		Downmix 2ch PCM
		LPCM	Downmix 2ch PCM		Downmix 2ch PCM
		Dolby Digital	Dolby Digital		Downmix 2ch PCM
DVD-video		DTS	DTS		Downmix 2ch PCM
		LPCM	2ch PCM		2ch PCM
Audio CD /		PCM	2ch PCM		2ch PCM
MP3
DTS-CD		DTS	DTS		Downmix 2ch PCM
*1	Full decoded.
*2	Only the independent substream is decoded.
*3	Dolby TrueHD stream is decoded.
*4	Only the Dolby Digital substream is decoded.
*5	Only the core substream is decoded.

•When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the “HD Audio Output” even if the “BD Audio Mode” is set to “Mix Audio Output”.

Note

•In order to output LPCM signal from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks while outputting the HDMI audio signal, set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.

Surround Connections to a Device with 7.1/5.1-channels of Analog Audio Inputs

Analog 7.1ch/5.1ch audio signals can be output from AUDIO OUT (ANALOG 7.1ch) jacks.

AV amplifier

this unit

FRONT

L

R

CENTER

SUB

WOOFER

SURROUND

L

R

SURROUND

BACK

L

R

audio

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

Note

•If you connect to 5.1-channel surround system, do not connect to SURR BACK L/R (surround back L/R) jacks, then set “Surround Back” in “Speaker Size” to “None”.

EN 17