44 EN
Setting items Options
Network Connection Enable
(Custom)
DNS
Setting
Auto(DHCP)*
Set the DNS setting.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual
Primary DNS
Secondary
DNS
Proxy
Setting
Do Not Use*
Set the proxy server.
In most cases, you can connect
to the Internet without using
proxy server.
Use Proxy
Address
Proxy Port
Connection
Speed
Auto*
Set the connection speed.
In most cases, you can connect
to the Internet without making
any changes to the default
setting.
10BASE Half
10BASE Full
100BASE Half
100BASE Full
BD-Live
Setting
Allow*
You can restrict Internet access
Limited Allow when BD-Live
functions are used.
Limited Allow
Prohibit
Disable Deactivate the network
connection.
Software Upgrade
Allows you to upgrade this
unit’s firmware.
Refer to page 48.
Current Version:
Indicates the current firmware version.
Disc Upgrade:
Allows you upgrade this unit’s firmware using a disc.
Network Upgrade:
You can upgrade the firmware version by connecting this unit to the Internet.
*) Settings with (*) are the default.
• HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard. In addition to Onkyo AV
components, it allows interoperability with CEC-compatible AV components and TVs made by other manufacturers.
• When “HDMI CEC” setting is set to “On”, functions listed below will be available.
Direct Change
When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected
automatically. The appropriate external input channel can also be selected on your TV automatically when you
press [PLAY B] when the unit’s power is on.
Standby
When you press and hold [
I
/
y
y ON / STANDBY] on the front panel for 2 seconds, it turns off the power of the TV
first and then turns off the power of this unit also.
System Information
Get & Set Menu Language
• The unit recognizes the OSD language set for the TV and automatically sets the same language as the player
menu language (OSD menu language) for this unit.
• This feature is available only when “Auto(XXXX)” is selected in “Player Menu” in the setup menu. (Refer to “Player
Menu” on page 35.)
Note
•
HDMI CEC is available only when the display device is connected by an HDMI cable, and when it supports HDMI CEC feature.
FUNCTION SETUP