Onkyo CR-325 Can’t play MP3 files, Can’t play WMA files, No sound is heard from your turntable

Troubleshooting—Continued

USB Mass Storage Device Playback (CR-525 only)

Can’t access the music files on a USB mass storage device.

•Make sure that the USB indicator light is on. If the light is not on, make sure that it is connected correctly and that the USB mass storage device is one that is supported (see pages 37, 38).

•The CD receiver supports USB mass storage devices that support the USB Mass Storage Class. However, playback may not be possible with some USB mass storage devices even if they conform to the USB Mass Storage Class.

•Check that the memory format is FAT16 or FAT32.

•USB mass storage devices with an internal USB hub are not supported.

Can’t play MP3 files.

• MP3 files without a “.mp3” or “.MP3” filename extension are not recognized.

Can’t play WMA files.

•WMA files without a “.wma” or “.WMA” filename extension are not recognized.

•The WMA file’s copyright option is on. Don’t use the copyright option.

External Components

Interactive control with other Onkyo u-capable components is not working.

•Make sure the ucables and analog audio cables are connected correctly (see pages 21 to 23). Connecting only an ucable won’t work.

•Make sure the Input Display matches the type of device that you’ve connected to the CD receiver (see page 27).

No sound is heard from a connected component.

•Make sure the correct input source is selected (see page 25).

•Make sure the analog audio cable is connected correctly (see pages 21 to 23).

•Make sure that all audio connecting plugs are pushed in all the way (see page 20).

No sound is heard from your turntable.

•Make sure the turntable has a built-in phono equalizer.

•If the turntable doesn’t have a phono equalizer built-in, you must provide one.

Timers

Timer playback or recording doesn’t work.

•Make sure the clock has been set correctly (see pages 49, 50).

•Timed operation will fail if the CD receiver is on at the specified On time, so make sure it’s set to Standby (see page 53).

•The timer may overlap with another timer. If you program several timers, make sure they don’t overlap (see page 51).

•If you press the [SLEEP] or [TIMER] button while a timed operation is in progress, the timer will be cancelled.

•Make sure the ucables and analog audio cables are connected correctly (see pages 21 to 23).

•If you’re using an Onkyo component for timed playback or recording, you must set the Input Display to match that component (see page 27).

Clock

The time is not displayed in Standby mode.

• Set the CD receiver so that the time is displayed in Standby mode (see page 50).

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.

The CD receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this should happen, unplug the power cord, wait at least 5 seconds, and then plug it again.

58