/
TONE
ENTER
S.BASS MUTING
DIRECT
Adjusting the Bass and Treble
1 | Press the [TONE] button to select |
| |
| “Bass”. |
| Remote |
| controller |
2 | Use the Previous and Next |
| |
| [7]/[6] buttons to adjust the |
| bass. |
| The default setting is “±0”. You can |
| adjust the bass and treble from |
| Press [ENTER], and then use the |
| Previous and Next [7]/[6] |
buttons to adjust the treble.
Notes:
•If you press no buttons for 8 seconds, the previous display will appear auto- matically.
•If you press the [TONE] button while the Direct function is on, the Direct function will be turned off.
Using the Super Bass Function
To turn on the Super | Remote controller |
Bass function, press the |
|
[S.BASS] button. |
|
The S.BASS indicator lights
up. To turn off the Super Bass
function, press the [S.BASS] button again.
Note:
If you press the [S.BASS] button while the Direct func- tion is on, the Direct function will be turned off.
Using the Direct Function
To turn the Direct function on or off, press the [DIRECT] button on the CD receiver.
When the Direct function is off, the tone controls can be used to adjust the sound. When the Direct function is on, the tone
controls are bypassed, so you can enjoy a
pure sound, and the DIRECT indicator lights up.
DIRECT indicator
On the remote controller, press the [TONE] button for 3 seconds to turn on the Direct function.
Muting the Sound
To mute the output of the CD | Remote controller |
receiver, press the remote con- |
|
troller’s [MUTING] button. |
|
The MUTING indicator |
|
flashes on the display. The vol- |
|
ume control indicator flashes, |
|
too. |
|
MUTING indicator |
|
To unmute the CD receiver, press the [MUTING] button again.
Tips:
While the CD receiver is muted:
•Turning the [VOLUME] control on the CD receiver or pressing the VOLUME [q]/[w] buttons on the remote controller will unmute the CD receiver.
•If you turn the CD receiver off, the next time you turn it on, the CD receiver will be unmuted.
26