Onkyo CR-525 Using the Sleep Timer, Checking the Remaining Sleep Time, Canceling the Sleep Timer

Models: CR-525 CR-325

1 60
Download 60 pages 52.46 Kb
Page 55
Image 55
Using the Sleep Timer

Using the Timers—Continued

Using the Sleep Timer

With the sleep timer, you can set the CD receiver so that it automatically turns off after a specified period.

SLEEP

Press the [SLEEP] button repeat- edly to select the required sleep time.

With the [SLEEP] button, you can set the sleep time from 90 to 10 minutes in 10 minute increments.

Use the Previous and Next [7]/[6] buttons to set the sleep time in 1 minute increments from 99 to 1.

SLEEP indicator

When the sleep timer has been set, the SLEEP indicator appears on the display, as shown. The sleep time appears on the display for about 8 seconds, then the pre- vious display reappears.

Note:

The sleep timer will be ignored while dubbing a CD to an Onkyo cassette deck or MD recorder is in progress. The CD receiver will automatically switch to Standby when the dubbing is complete.

Checking the Remaining Sleep Time

To check the remaining sleep time, press the [SLEEP] button.

Note that if you press the [SLEEP] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

Canceling the Sleep Timer

To cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears.

55

Page 55
Image 55
Onkyo CR-525, CR-325 instruction manual Using the Sleep Timer, Checking the Remaining Sleep Time, Canceling the Sleep Timer