Onkyo CR-325 Setting the Clock-Continued, Setting the Clock Manually, Displaying the Day and Time

Setting the Clock—Continued

Setting the Clock Manually

The time can be displayed in either 12- or 24-hour for- mat.

STANDBY/ON	CLOCK
	CALL
Number	DISPLAY
buttons
TIMER	MENU/NO
/
	ENTER

7

8

Use the Previous and Next [7]/ [6] buttons to set the time.

You can also use the remote controller’s number buttons to enter the time.

For the 12-hour format, use the remote controller’s [>10] button to select AM or PM.

Press [ENTER].

1

2

Press the [TIMER] button repeat- edly until “Clock” appears.

Press [ENTER].

The clock is set and the second dot starts flashing.

Displaying the Day and Time

To display the day and time, press the remote controller’s [CLOCK CALL] button.

If the CD receiver is on Standby, the time is displayed for 8 seconds.

3

	Using the 12- or 24-hour Format
Use the Previous and Next [7]/
	To change the time format between 12-hour and 24-hour,
[6] buttons to select “Manual-	while the time is shown on the display, press the [DIS-
Adjust”.	PLAY] button.

4

5

6

Press [ENTER].

Use the Previous and Next [7]/ [6] buttons to select the day of the week.

You can select: SUN, MON, TUE, WED, THU, FRI, or SAT.

Press [ENTER].

To cancel the Manual Adjust function at this point, press the [MENU/NO] button.

Displaying the Time in Standby Mode

To set the CD receiver so that the time is displayed while its on Standby, turn on the CD receiver, and then press and hold its [STANDBY/ON] button for 2 seconds.

Note that having the time displayed in Standby mode will consume a little more power.

50